Products

Contact Person : Ms. wang yunbin
Company Name : Shenzhen Erison Technology Co., Ltd.
Tel : 86-0755-27498685,13632875975
Fax : 86-0755-27498683
Address : Guangdong,shenzhen,Room 1001 Chamber of Commerce Information Building C,North Fuyong Lixing Road, Baoan District, Shenzhen ,China
Country/Region : China

heat shrink sleeve for pipes

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Plastic Tubes

heat shrink sleeve for pipes 1.Shrink ratio: 2:1 2.Extreme resistance to fuels 3.High flame-retardance.

VITON

Flexible, high-temperature, solvent-resistant Viton tubing

Application

With superior resistance to high and low temperature, fluids, solvents and corrosive chemical, VITON is particularly suitable for applications that require heat resistance (such as electric and hydraulic systems near engines and fuel tanks of airplanes and vehicles) and resistance to chemical solvents. It is particularly used in applications require high temperature (200°C) resistance or in chemically exposed environments. It can be used in applications where additional protection against weather, ultraviolet radiation and ozone degradation is needed. It is used for insulation and strain relief on appliances and for protection of electronic components.

Features/Benefits

·Shrink ratio: 2:1

·Excellent resistance to high temperatures, fluids, solvents, corrosive chemicals and radiation.

·Extreme resistance to fuels.

·High flame-retardance.

·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

Operating Temperature Range

·Operating temperature range: -65°C~200°C

·Minimum shrink temperature: 150°C

·Minimum full recovery temperature: 220°C

n Specification values

	Property	Requirement	Test method	Typical value
Physical:	Tensile strength	8.2MPa min.	ASTM D 638	≥10.3MPa
	Elongation	250% min.	ASTM D 638	≥300%
	Heat shock 300°C, 4hrs	No cracking, dripping or flowing	ASTM D 2671	Pass
	Low temperature flexibility -65°C, 4hrs	No cracking	ASTM D 2671	Pass
	Aging 250°C, 168hrs
	Tensile strength after aging	8.2MPa min.	ASTM D 638	≥8.2MPa
	Elongation after aging	200% min.	ASTM D 638	≥200%
Electrical:	Dielectric voltage withstand	2500V,60sec,no breakdown	ASTM D 2671	Pass
	Dielectric strength	7.9KV/mm min.	ASTM D 2671	≥7.9KV/mm
	Volume resistivity	109Ω·cm min.	ASTM D 876	≥109Ω·.cm
Chemical:	Corrosion	No corrosion	ASTM D 2671	Pass
	Flammability	Self extinguishing within 15sec	ASTM D 2671	Pass
Fluid resistance:	23°C,24hrs (aviation and diesel fuels, hydraulic fluids, lubricating oils, etc.)
	Tensile strength	8.2MPa min.	ASTM D 2671	≥8.2MPa
	Elongation	200% min.	ASTM D 2671	≥200%

Product sizes

mm/inch

Size	Inside diameter		Wall thickness	Standard length (m/spool)
Size	As supplied(min.)	After recovery(max.)	After recovery	Standard length (m/spool)
1/8	3.2(0.125)	1.6(0.062)	0.76±0.13(0.030±0.005)	50
3/16	4.8(0.187)	2.4(0.093)	0.89±0.18(0.035±0.007)	50
1/4	6.4(0.250)	3.2(0.125)	0.89±0.18(0.035±0.007)	50
3/8	9.5(0.375)	4.8(0.187)	0.89±0.18(0.035±0.007)	50
1/2	12.7(0.500)	6.4(0.250)	0.89±0.18(0.035±0.007)	30
3/4	19.1(0.750)	9.5(0.375)	1.07±0.21(0.042±0.008)	30
1	25.4(1.000)	12.7(0.500)	1.25±0.30(0.049±0.011)	30
1 1/2	38.1(1.500)	19.0(0.750)	1.40±0.38(0.055±0.015)	30
2	50.8(2.000)	25.4(1.000)	1.65±0.43(0.055±0.017)	30

heat shrink sleeve for pipes

Other products

Fluorine Rubber Tube

Fluorine Rubber Heat Shrink Tube

Pipe Heat Shrink Sleeve With Adhesive Liner

High flame-retardance viton heat shrink tube color black

heat shrink tube/sleeve/pipe marine tubes

Shrink ratio: 2:1 with viton heat shrink tube

color black viton heat shrink tube

FPM heat shrink tube